RAS 21.20
Have one to sell?
ConditionNew
New
The RAS 21.20 flanging machine turns up 90 degree flanges on radius cheeks so that the parts are ready for Pittsburgh or Snaplock joints. Quick, Safe, Cost efficient.
The operation speed is variable between 0 and 9.4 m/min. In addition the machine can be operated with 230V from a standard wall outlet. The large flanging rolls produce uniform and non-wavy results even on small radii.
The optional automatic material guiding system helps create consistent flange heights. The rolls in the top attachment pierce and offset the buttons for the CAM Standing Seam in a single pass. The machine comes with an extended material support area in front and behind the forming station. Accuracy and high quality as usual from RAS.
Material thickness max 1.5 mm
Flange height min-max 6-15 mm
Speed 0-9.4 m/min
Adjustable speed control
Variable flange height adjustment from ¼” to 5/8”
Optional Automatic sheet guide for inexperienced operators.
Material range: 16-26ga mild steel
Speed: 30ft per minute
Quick turn-up of flanges on straight, round and curved duct segments
Standing seam for joints with Pittsburgh seam
Cam standing seam for joints with snap-lock seam
Attachment for cam standing seam cuts and pierces the cams
Pre-bending station with adjustable stop
Infinite adjustment for sheet thickness from 0.5 to 1.5 mm
Spring steel insert in the machine table increases longevity
Automatic sheet guiding system for flange heights (8 or 10 mm)
Infinite speed for high productivity and safe material handling
Configuration for stainless steel air ducts available
We use cookies to improve your experience. Privacy Policy.